Cut off a cable marked 'P line' to remove the lines
[Rear Camera] Precautions on installation
Car must be turned off and no power. When connecting a power cable, make sure to connect the correct wires (+), (-). If not, the camera can get damaged. Check a polarity of wire (+), (-) before installation using a power test device.
[Rear Camera] Screen converted vertically or horizontally
Make sure if the installation is correct upon directions from the provided manual.
The screen can be showing with vertically or horizontally converted because it's a garnish type and is installed at number plates or trunk.
[Rear Camera] Noise on screen at night
It is normal to find a noise on screen at night same as other cameras have them with no lights condition.
[Rear Camera] No screen after intallation
Check a connecting condition of power cable (Red color) if it's disconnected.
SUPPORT FAQ